Furnace Oil CST 380: Specification & Supply
Product: Furnace Oil CST 380
Product Name (COA): Burning Grade Furnace Oil
Standard: Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2
Form: Residual fuel; dark, viscous liquid at room temperature
Our Fuel Oil products are designed to provide a versatile energy source for a variety of industrial uses. Known for their energy density, our fuel oils are ideal for applications that require reliable heat generation and efficiency. We offer Fuel Oil CST 380 which is used widely in marine and industrial sectors.
Furnace Oil CST 380 Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics.
Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates.
Technical Specification – Certificate of Analysis CST 380
Product Name: Burning Grade Furnace Oil
| Parameter / Characteristics | Test Method | Specification Limit & Unit | Test Results |
|---|---|---|---|
| Density @ 15°C | P 32 | kg/m³ | 979 |
| Flash Point | P 21 | Min. 66 °C | 79 °C |
| Kinematic Viscosity @ 50°C | P 25 | Max 380.0 CST | 214 CST (≤380.0 cSt) |
| Water Content | P 40 | Max 1.00% (V) | 0.3% |
| Total Sulphur | IP 336 | Max 4.00 mass% | 2.42% |
| Gross Calorific Value | P 7 | kcal/kg | 10,152 |
| Pour Point | P 10 | Max 30 °C | 30 °C |
Notes:
- Expected Test Result for CST 380: ≤380.0 cSt (Typical range: ~200–380 cSt, as seen in your original report: 214 cSt)
- CST 380 allows higher viscosity (≤380 cSt), making it suitable for heavier industrial applications.
- All test results meet the specified limits.
- This certificate confirms compliance with industry standards for Burning Grade Furnace Oil.
Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization.
Applications
Used widely in marine and industrial sectors. It acts as a key ingredient in the generation of electricity and heat.
Packing and Shipping
Packing and shipping arrangements are agreed per contract. Send your requirement, including packing preference and load or discharge port, via the inquiry form.
Trade Terms
Trade terms are agreed per contract. Send your requirement, including preferred Incoterm, quantity and delivery window, via the inquiry form.
Storage and Handling
Reactivity Data – Chemically stable and incompatible with strong oxidizers. Does not React vigorously with common materials but can react with oxidizing agents. Health Hazard Data – Routes of entry may be through inhalation/ ingestion/ skin/ eye.
Ingestion – may cause spontaneous vomiting, irritation of mouth throat and gastro intestinal tract. On prolonged exposure it makes skin dry, erythema oil acne, development of warty growths which may lead to skin cancer, skin cracking and contact dermatitis. As it is handled at a high temperature, skin contact could produce burns. On exposure to eye it may cause light to moderate irritation. Ingested – do not induce vomiting as it may lead to chemical pneumonitis. Remove contaminated clothing immediately and wash affected area with water and soap. If eyes are affected, irrigate liberally with copious amounts of water and seek medical advice.
Reactivity Data – Chemically stable.
Why Ametheus
- Documented buyer onboarding and seller due diligence on the energy desk.
- Independent inspection and complete shipping documents, as agreed on the cargo.
Frequently Asked Questions
What is Furnace Oil CST 380?
Furnace Oil is a residual fuel, a fraction obtained from petroleum distillation, either as a distillate or a residue. CST 380 is used widely in marine and industrial sectors. Viscosity is the most important characteristic: CST 380 allows higher viscosity (≤380 cSt), making it suitable for heavier industrial applications. Expected test result: ≤380.0 cSt (typical range: ~200–380 cSt, as seen in the original report: 214 cSt).
Which standard does the furnace oil meet?
Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2.
Why does furnace oil need pre-heating?
Viscosity influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, the burner may be hard to light and operation may be erratic. Pre-heating is necessary for proper atomization.
Inquiry
For current availability, grade, quantity and delivery window, contact us with:
- Product & grade (CST 380)
- Quantity
- Load or discharge port / delivery location
- Delivery window
- Preferred Incoterm and packing
New buyers: please complete the Preliminary KYC form or contact us.
We respond on live enquiries.
