Metal Scrap – Non-Ferrous & Ferrous Grades (ISRI)

Request a quote

Product: Metal Scrap – non-ferrous and ferrous
Non-ferrous: Copper, aluminium, brass, lead, zinc, stainless steel and mixed metal (Zorba, Zurik)
Ferrous: HMS 1&2, shredded, blue steel, turnings, plate and structure, re-rollable, re-usable and low-nickel alloy scrap
Grading standard: ISRI Scrap Specifications (code words and item numbers)
Key HS code: 7404 00 12 (copper scrap – Barley, Berry, Birch, Candy, Cliff)

Copper Millberry scrap – bright bare copper wire (ISRI Berry / Barley)

Metal Scrap Overview

Ametheus supplies graded non-ferrous and ferrous metal scrap to smelters, refineries, foundries, steel mills, rolling mills and recycling units. Every grade on this page is described by its internationally used ISRI code word or item number, so buyers and sellers talk about the same material from enquiry to contract.

All figures on this page are typical offer specifications. Final grade, tolerances, inspection and packing are confirmed in the sale contract for each lot.

Metal Scrap Categories at a Glance

Non-ferrous metal scrap

Scrap family Grades / ISRI code words HS heading
Copper scrap Barley, Berry, Birch/Cliff, Candy, Dream (incl. Millberry) 7404
Aluminium scrap Taint/Tabor, Tense, Extrusions, Talk, Telic, Twitch, Aluwire, Foils, UBC 7602
Brass scrap Honey, Ebony, Pales, Pallu, Ocean 7404
Lead scrap Rains, Radio, Rails, Relay, Ropes 7802
Zinc scrap Saves, Scabs, Score, Scrub, Scull 7902
Stainless steel scrap SS304, SS316, SS316L, duplex grades, nickel- and molybdenum-bearing 7204
Mixed metal scrap Zorba, Zurik As per composition

Ferrous metal scrap

Scrap type Reference
Heavy Melting Scrap (HMS 1&2) ISRI 200–206
Plate and Structure Scrap (PNS) ISRI 236 / 237 / 238
Shredded Scrap Specification on request
Blue Steel Scrap Specification on request
Turning Scrap Specification on request
Re-Rollable Scrap Specification on request
Re-Usable Scrap Specification on request
Low Nickel Alloy Scrap Specification on request

Ferrous waste and scrap falls under HS heading 7204; the exact sub-heading depends on the grade.

Copper Scrap

Copper Millberry (No. 1 copper wire – ISRI Berry / Barley)

Clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B&S wire gauge, free of brittle burnt wire.

Parameter Specification
HS code 7404 00 12
Purity 99.99% min
Grade Grade A
Type Copper wire / copper granules
Advantage High purity, very clean
Diameter 0.30 mm, 0.25 mm, 0.20 mm
Tensile strength 1000 N/mm², 900 N/mm², 500 N/mm², 450 N/mm²
Forms offered Copper wire, copper granules, channel, radiator, coil and wire scrap

Grade 1 copper (Berry)

Grade 1 copper scrap, not mixed, to specification C11000 electrolytic tough pitch (ETP) copper, copper content 99.9%.

Element Limit
Copper (Cu) 99.9% min
Lead (Pb) 0.005% max
Total impurities 0.3% max

Grade 2 copper (No. 2 – ISRI Birch / Cliff)

No. 2 copper scrap – Birch and Cliff grade bales

Miscellaneous unalloyed copper wire and scrap with a nominal 96% copper content (minimum 94%) as determined by electrolytic assay.

Must be free of: excessively leaded, tinned or soldered copper; brass and bronze wire; excessive oil; iron and non-metallics; brittle burnt wire; hair wire (very fine-stranded wire); and insulation. Dirt must be removed by suitable means.

HS code reference – copper waste and scrap

HS code Description
7404 00 Copper waste and scrap
7404 00 1x Of copper
7404 00 12 Copper scrap, namely: copper wire scrap covered by ISRI code words ‘Barley’, ‘Berry’ and ‘Birch’; heavy copper scrap covered by ISRI code word ‘Candy’; unalloyed copper scrap covered by ISRI code word ‘Cliff’; copper wire nodules scrap covered by ISRI code words ‘Clove’, ‘Cobra’ and ‘Cocoa’; light copper scrap covered by ISRI code word ‘Dream’; Muntz metal tubes covered by ISRI code word ‘Palms’

Aluminium Scrap

Grade Description
Taint/Tabor Clean mixed old alloy sheet aluminium of two or more alloys. Free of oil, venetian blinds, castings, screen wire, food or beverage containers, radiator shells, aircraft sheet, bottle caps, plastic, dirt and other non-metallics. Oil and grease not to total more than 1%.
Tense Clean mixed aluminium castings, which may include automobile and aircraft castings but no ingots. Free of iron, brass, dirt and other non-metallic items. May also include auto parts, radiators and other soft material.
Extrusion (6063) Old extruded aluminium of one alloy, typically 6063, 6061 or 7075. Free of iron, thermal-break strips, saw chips, zinc corners, dirt, paper, cardboard and other foreign contamination. Less than 1% attachments.
UBC (used beverage cans) Magnetically separated aluminium UBC, free of steel, lead, bottle caps, plastic cans and other plastics.
Talk, Telic, Twitch, Aluwire, Foils Specification on request

Brass Scrap

Yellow brass scrap – ISRI Honey grade mixed brass solids

Grade Description
Honey (yellow brass) Mixed yellow brass solids, including brass castings, rolled brass, brass rod, tubes and miscellaneous yellow brasses.
Ebony, Pales, Pallu, Ocean Specification on request

Lead Scrap

Grades offered: Rains, Radio, Rails, Relay and Ropes. Specifications are shared on request for each lot.

Zinc Scrap

Old zinc die-cast scrap – ISRI Saves grade

Grade Description
Saves (old zinc die-cast scrap) Miscellaneous old zinc-base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. Non-metallics, dirt, foreign attachments and volatile substances (such as rubber, cork, plastic and grease) are not permitted.
Scabs, Score, Scrub, Scull Specification on request

Stainless Steel Scrap (CRSS)

Stainless steel scrap SS304 / SS316 in compressed bales

Grade Description
SS304 (ISRI Sabot – 18/8 clips and solids) The standard “18/8” stainless steel and the most widely used grade. Minimum 7% nickel and 16% chrome; maximum 0.50% molybdenum, 0.50% copper, 0.045% phosphorus and 0.03% sulphur; free of harmful contaminants.
SS316 The standard molybdenum-bearing grade, with more molybdenum and nickel than SS304. Better overall corrosion resistance than 304, particularly against pitting and crevice corrosion in chloride environments.
SS316L Low-carbon version of 316, immune to sensitisation (grain-boundary carbide precipitation). Widely used in heavy-gauge welded components (over about 6 mm).
Duplex, nickel- and molybdenum-bearing grades Specification on request

Mixed Metal Scrap

Zorba and Zurik (shredded mixed metal) are offered on request, with composition and recovery agreed per lot.

Ferrous Scrap

Heavy Melting Scrap (HMS 1&2)

Heavy melting steel scrap HMS 1&2 (ISRI 200-206)

HMS 1&2 (80:20) and HMS 1 are the most traded grades of scrap metal worldwide. HMS 1&2 (80:20) loads around 20 tonnes in a 20-foot container, a little lighter than HMS 1&2 (90:10). It conforms to ISRI 200 to 206 and typically comprises household, demolition and refurbishing scrap.

ISRI code Grade Description
200 HMS 1 Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 × 24 inches (charging box size), prepared to ensure compact charging.
201 HMS 1 – 3 ft × 18 in Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 36 × 18 inches (charging box size), prepared to ensure compact charging.
202 HMS 1 – 5 ft × 18 in Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 × 18 inches (charging box size), prepared to ensure compact charging.
203 HMS 2 Wrought iron or steel scrap, black and galvanized, ⅛ inch and over in thickness, charging box size, to include material not suitable as No. 1 heavy melting steel. Prepared to ensure compact charging.
204 HMS 2 Wrought iron and steel scrap, black and galvanized, maximum size 36 × 18 inches. May include all automobile scrap, properly prepared.
205 HMS 2 – 3 ft × 18 in Wrought iron and steel scrap, black and galvanized, maximum size 36 × 18 inches. May include automobile scrap, properly prepared, but free of sheet iron or thin-gauge material.
206 HMS 2 – 5 ft × 18 in Wrought iron and steel scrap, black and galvanized, maximum size 60 × 18 inches. May include automobile scrap, properly prepared, but free of sheet iron or thin-gauge material.

Plate and Structure Scrap (PNS)

Plate and structural steel (PNS) scrap – beams, angles and plates

Conforms to ISRI 236 / 237 / 238. Mainly 6 mm thick structural steel profiles such as H-beams, angles, I-beams, pipes, piling sheets, merchant bars and other heavy material. Pieces are generally 1500 mm × 1000 mm, and because of its high density a 20-foot container loads at least 25 tonnes.

Other ferrous grades

Shredded scrap, blue steel scrap, turning scrap, re-rollable scrap, re-usable scrap and low-nickel alloy scrap are offered on request. Specifications are confirmed for each lot.

Trade Terms

Grade, tolerances, packing (loose, baled or bundled), container loading, inspection, Incoterms and payment are agreed lot by lot and recorded in the sale contract. The specifications on this page are an offer framework, not a binding specification until both parties sign.

Working with Ametheus

Step Action What happens
01 Enquiry Send the scrap family and grade (ISRI code word or item number), quantity, destination port and preferred Incoterm.
02 Indication We revert with an indication, the loading window and the specification that will sit in the contract.
03 Contract The sale contract records grade, tolerances, inspection, packing and payment.
04 Shipment Loading under the agreed inspection. Documents are released against the agreed payment instrument.

Information to include in an enquiry

Item What helps us quote accurately
Product Scrap family and grade, e.g. Copper Millberry, Taint/Tabor, SS304, HMS 1&2 (80:20)
Quantity Spot lot or monthly programme, number of containers and tolerance
Destination Discharge port or delivery location
Incoterms FOB, CFR or CIF as preferred
Timing Shipment window
Payment LC at sight, CAD or other instrument
Special limits Any purity, size or contamination limits required by your plant

Why Ametheus

Related pages: Iron Ore | Bauxite | Commodities Trading.

FAQ

Which metal scrap families are listed?

Non-ferrous: copper, aluminium, brass, lead, zinc, stainless steel and mixed metal (Zorba, Zurik). Ferrous: HMS 1&2, shredded, blue steel, turnings, plate and structure, re-rollable, re-usable and low-nickel alloy scrap.

What is the purity of Copper Millberry?

99.99% minimum, offered as copper wire or copper granules under HS code 7404 00 12.

What is the difference between Grade 1 and Grade 2 copper?

Grade 1 (Berry) is clean, unalloyed copper with 99.9% copper content. Grade 2 (Birch/Cliff) is miscellaneous unalloyed copper with a nominal 96% copper content (minimum 94%).

Which ISRI codes cover HMS 1&2?

HMS 1 is ISRI 200, 201 and 202. HMS 2 is ISRI 203, 204, 205 and 206.

Are the figures binding?

No. All figures are typical offer specifications until both parties sign the sale contract.

Inquiry

Request a quote

For current availability, grade, quantity and delivery window, please include:

  • Scrap family and grade (ISRI code word or item number)
  • Quantity, packing and destination
  • Preferred shipment window and any purity, size or contamination limits

Commodities desk: [email protected] | [email protected]
New buyers: please complete the Preliminary KYC form or contact us.

We respond on live stems.