HFO – Fuel Oil KS-1310:2020: Specification & Supply
Product: Heavy Fuel Oil (HFO) / Residual Fuel Oil
Standard: Kenya Standard KS-1310:2020 – Petroleum and Petroleum Products – Fuel Oils – Specification
Form: Residual fuel; dark, viscous liquid at room temperature
Typical Grade: Viscosity max 180 cSt @ 50°C
Our residual fuel oils are designed to provide a reliable and energy-dense source for industrial heat generation, power plants, and marine applications. KS-1310:2020 is the official Kenya Bureau of Standards specification for fuel oils intended for oil-fired furnaces, industrial use, and marine applications.
Features
- Correct formulation
- Purity and controlled metals
- Effectiveness in combustion
- Accurate composition meeting Kenyan standards
Usage: Industrial furnaces, power generation, marine boilers
Technical Specification – KS-1310:2020
The fuel oil shall comply with the following requirements when tested according to the methods specified.
| No. | Property | Unit | Limit | Test Method |
|---|---|---|---|---|
| 1 | Kinematic Viscosity @ 50°C | cSt | Max 180 | ASTM D445 |
| 2 | Density @ 20°C | kg/L | Max 0.990 | ASTM D1298 |
| 3 | Conradson Carbon Residue | % m/m | Max 15 | ASTM D189 |
| 4 | Sulphur Content | % wt | Max 2.0 | ASTM D4294 |
| 5 | Vanadium Content | mg/kg (ppm) | Max 200 | IP 288 / IP 501 |
| 6 | Asphaltenes | % m/m | Max 10 | IP 143 |
| 7 | Ash Content | % m/m | Max 0.12 | ASTM D482 |
| 8 | Sodium Content | mg/kg (ppm) | Max 30 | IP 288 / IP 501 |
| 9 | Water Content | % vol | Max 0.5 | ASTM D95 |
| 10 | Pour Point | °C | Max 15 | ASTM D97 |
| 11 | Flash Point (PM) | °C | Min 66 | ASTM D93 |
| 12 | Aluminium + Silicon | mg/kg (ppm) | Max 50 | ASTM D5184 |
| 13 | Net Calorific Value | MJ/kg | Min 40.5 | ASTM D4868 |
| 14 | CCAI | — | To be reported | ISO 8217 |
| 15 | Nitrogen Content | % wt | Max 0.4 | ASTM D3228 |
| 16 | Sediment by Extraction | % wt | Max 0.15 | ASTM D473 |
| 17 | Total Sediment Existent (TSE) | % m/m | Max 0.10 | IP 390 / IP 375 |
| 18 | Total Sediment Potential (TSP) | % m/m | Max 0.10 | IP 390 |
| 19 | Strong Acid Number | mg KOH/g | NIL | ASTM D664 |
| 20 | Calcium Content | mg/kg | Max 30 | IP 501 |
| 21 | Phosphorus Content | mg/kg | Max 15 | IP 501 |
| 22 | Zinc Content | mg/kg | Max 15 | IP 501 |
| 23 | Others | — | Free from contaminants (e.g. lubricating oils) | — |
Notes
- Viscosity max 180 cSt @ 50°C is the key handling parameter for this grade.
- Sulphur is limited to max 2.0% wt — tighter than many traditional HSFO grades.
- Al + Si (catalytic fines) max 50 ppm and Asphaltenes max 10% provide practical stability limits.
- Strong Acid Number must be NIL.
- All parameters must be verified by independent inspection (SGS / BV / Intertek) at load port.
Applications
- Industrial oil-fired furnaces and boilers
- Power plant combustion equipment
- Marine boilers and auxiliary engines (subject to sulphur regulations)
- Heat generation in cement, steel, and process industries
Packing and Shipping
- Packaging: Bulk (tanker / vessel)
- Packing and shipping arrangements agreed per contract
- Minimum typical parcel: subject to availability and buyer requirement
- Incoterms: FOB · CFR · CIF (as agreed)
Storage and Handling
Chemically stable under normal conditions. Incompatible with strong oxidizers.
Health & Safety notes:
- Avoid skin and eye contact. Prolonged skin exposure can cause irritation, dryness, or dermatitis.
- High-temperature handling can cause burns.
- Do not induce vomiting if ingested — seek medical advice.
- Store in clean tanks free from residual lubricants or contaminants.
- Pre-heating may be required for pumping and atomization depending on ambient temperature.
Why Ametheus
- Documented buyer onboarding and seller due diligence
- Independent inspection (SGS / BV / Intertek) and complete shipping documents
- Physical cargo trade only — structured through Sale & Purchase Agreement
- Supply into East Africa, including Kenya (Mombasa and related ports)
Frequently Asked Questions
What is HFO under KS-1310:2020?
Heavy / residual fuel oil meeting the Kenya Bureau of Standards specification for fuel oils used in oil-fired furnaces, industrial applications, and marine use. Viscosity is limited to max 180 cSt at 50°C.
Which standard does this HFO meet?
Kenya Standard KS-1310:2020 – Petroleum and Petroleum Products – Fuel Oils – Specification.
Why is viscosity important?
Viscosity controls pumping, storage heating, and atomization. The 180 cSt max limit allows practical handling while ensuring suitable combustion performance.
How does KS-1310:2020 compare with ISO 8217?
It is a local industrial standard. Key parameters such as Al+Si (max 50 ppm), asphaltenes (max 10%), and sediments are practical and closer to residual marine grades (RME/RMG 180) on several critical points, with a stricter sulphur limit of 2.0%.
Inquiry
For current availability, quantity, and delivery window, contact us with:
- Product & grade (HFO – KS-1310:2020)
- Quantity (MT)
- Load or discharge port / delivery location
- Delivery window
- Preferred Incoterm and inspection agency
Contact: [email protected]
New buyers: please complete the Preliminary KYC form or contact us.
We respond on live enquiries.
Related products:
